Fiber Optic Devices Ltd.

FOD 111

The Laser Fault Locator FOD 111 is a Laser Source with an output power of 1 mW in SM or MM fiber. It works from two AAA batteries. The universal adapter allows to use the Laser Fault Locator FOD 111 with all popular connectors without changing the adapter. If you need to test a patchcord, to find fiber breaks, or identify one fiber from ten - this instrument is for you!

Locates breaks, bends even through jacketed fibers
Troubleshoots faults within OTDR dead zone
Mechanical fusion splice optimization
End-to-end fiber identification
Finds bad connectors splices
Connector end-face polish inspection
LANs, splice trays, patch panels

MODEL	FOD 111
Output Power	1 mW
Wavelength	650 nm
Fiber	SM &MM
Internal Modulation	CW
Power Supply	2xAAA batteries
Stability @ 20^oC @15 min	±0.1 dB
Accuracy of Central Wavelength	±10 nm
Spectral Width @20^oC	3 nm
Size/Weight	96x47x24mm / 50g
Battery Lifetime	16 Hours

Universal Adapter

No need to loose time on FC connector nut, no need to change adapters for various connectors.
Our universal adapter allows to check cable quality in 2 seconds: one - to plug, two - to look!

FOD 113, 114

The LED Light Source FOD 113 or FOD 114 is a light weight and a very small size portable device which has been created to become as popular as a cellular telephone or a pager. The devices of this series are equipped with a universal optical interface which allows quicker hook up to the line, thus saving time for complete measurements. The LED Light Sources meet TIA/EIA-526-14A requirements for coupling power into multimode fiber.

Multimode network testing
Maintenance applications

MODEL	FOD 113	FOD 114
Output Power LED 850 nm @ 62.5 µm	-20 mW	-
Output Power LED 1310 nm @ 62.5 µm	-	-20 mW
Battery Lifetime	8 Hours
Power Supply	1xAAA batteries
Size/Weight	60x35x15mm / 40g
Operating temperature	-10^oC to +40^oC

Other portable light sources:
At one wavelength	\|	At two/three wavelengths	\|	Miniature Light Sources	\|	ASE light source C-Band